Hey D or J On my monarch94 my bottom wing panel is loose from the foam. What is the best way to fix it?

From : Don Stackhouse

If a very large area is loose, it may be easiest to cut the skin off and fit and glue on a new skin. The seams between the edges of the new skin and the remaining old skin can be patched with narrow strips of 3/4 ounce glass cloth. You can use water-based urethane varnish instead of epoxy to apply the glass.

If it's just a small patch of skin that's loose, you may be able to inject a few drops of thin epoxy every 1/2" or so all over the delaminated area, then weight or vacuum bag the delam flat till the epoxy cures.

Don Stackhouse
DJ Aerotech