|
|
| DJ Aerotech
Makers of the Finest, High Performance Electrics & Sailplanes! |
|
|
![[ROADKILL WORLD WAR II SERIES MESSERSCHMITT BF-109]](roadkill_ww2_img/rk_109f.jpg) |
And why did we call them ROADKILL???? They are just plain flat! ;-)
The Roadkill model kit is a Profile / Stand-off scale design. What that means to you, the builder flyer, is a fast building,
good looking kit that flies like a dream. An experienced builder should be able to complete the kit in one or two evenings.
Each kit, comes complete with laser cut wood parts, push rod linkages, landing gear parts and most importantly, an electric motor
(with capacitor) and propeller. The builder need only provide a radio, battery, BEC/ESC, glue and a little time to build.
We have estimated the flying speed of these docile machines around 10 - 15 mph at half throttle. Using a Li-Poly (Lithium Polymer) you
should easily have 20 - 30 minute flying sessions or with a NIMH (Nickel Metal Hydride) battery pack, 8 - 10 minute flying sessions
are possible. (Flying time with NICAD batteries are about 1/2 as long as the NIMH.) Each landing gear is attached with a single
screw, so they can be easily removed if your preference is to fly in a grassy area. With the landing gear attached,
coupled with a steerable tail/nose wheel, these fighters are easily taxied around your favorite gymnasium.
|
| 109F Specifications |
| Wingpan |
Length |
Weight |
Wingloading |
# Servos |
Battery |
Price |
| 21.00" |
19.00" |
2.8oz (RTF) |
5.2oz/sq.ft |
2 |
250mah Li-Poly / 120mah NiMH |
$48.95 |
|
|
|
|
| Kit Highlights! |
 |
Electric (MPS-1A) motor with gear reduction included! |
|
Propeller and spinner are included! |
|
Highly prefabricated for very short building times! |
|
Laser cut wood parts for an accurate fit! |
|
3 - Functions; Rudder, Aileron and Elevator.
(Rudder is coupled to Aileron servo) |
|
Landing gear & wheels included! (Removable for grass flying) |
|
Complete and accurate plans and building instructions! |
|
Click HERE
to see a sample kit!!!
|
|
|
|
What is needed to complete the kit!
|
 |
Two servos. Such as the Pico, MX-30 or HS-50 |
|
A lightweight receiver. Such as GWS-R4P |
|
Electronic speed controller & Battery Eliminator Circuit.
Such as Castle Creations "Pixie 7P" |
|
7 cell NIMH or 2 cell Li-Poly Battery pack. |
|
Medium & Thin CA Glue |
|
Building Tools, for example: (Knife, wire snips, needle nose, waxed paper,
soldering iron, X-acto knife, sanpaper, screwdrivers & tape for hinges) |
|
DJ Aerotech carries the necessary items to complete your Roadkill kit. Please check
out the Accessories page. We offer a suitable Receiver, Electronic Speed Control
/ Battery Eliminator Circuit (ESC / BEC), Battery Packs, Charger and several Servos for the DJ Aerotech Roadkill models. |
|
|
|
|
|
|  |
|
|
Photos
Click on thumbnail to enlarge image.
|
|
|
|
|
|
| IMPORTANT BATTERY INFORMATION |
We are receiving numerous E-mails related to problems flying our Roadkill kits. In every case it is an weight issue
related to using a battery pack too large for the kit. We can't STRESS enough the proper sized battery pack should be used in all
the Roadkill kits. Larger packs WILL yield undesirable flight characteristics. For each of our Roadkill models we post a recommended
NiMH or LI-Poly battery size. These batteries packs have been extensively tested and proven to provide a flyable model based on the
stock motor configuration.
The Li-Poly battery packs MUST be charged with a charger designed to charge Li-Poly battery packs.
(For example: The Apache LiPoly Charger) Failure to do so could result with the battery pack (basement / garage etc...)
catching fire. Also make sure your ESC is compatible with a Li-poly pack, in particular that the cutoff voltage is correct.
The Castle Creations Pixie 7-P is our preferred choice for this.
PLEASE, PLEASE, PLEASE... If you have any questions at all about what is the best battery for your model, don't hesitate to send an
e-mail to Joe or Don.
| Do you have more questions?
Check out the ASK J & D section on Roadkill models. |
|
|
|
)
){kind=link}
