Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

2M Monarch Ascension F3-RES

$180.00
Quantity:

Product Description

Our new Monarch Ascension is a 2M F3-RES class sailplane that can be enjoyed by sport fliers and competitors alike.

The inspiration for this sailplane came from our "Monarch Series" of Handlaunch gliders, specifically the "D-Lite" version we produced in the mid 1990's which were all composite materials. We wanted the performance, structural integrity, and great handling feel in a 2M sailplane, only this time constructed primarily of wood.

With the Ascension, we believe we tapped into that concept. With the span increase, we have also increased overall performance while maintaining the wonderful personality of the "D-lite". 

The reduced weight of the Ascension improves low-speed performance. An accompanying reduction in wing area to keep the wing loading adequate for good penetration provides great performance at all air speeds!

Features include:

*  "D" tube wing construction, low density and custom sized wing sheeting provides excellent torsional strength to weight ratio (flutter resistance)

*  Single center section wing joiner

*  Optimized carbon spar caps used in wing spar (no doublers required!)

*  All wood fuse is optimized with components and construction for reduced weight and torsional strength

*  A basically "straight" wing spar system reduces weight and simplifies construction (improves load-carrying capabilities)

*  Sheet tail surfaces simplify construction, this combined with long control horns, provides strength with flutter resistance.

*  "Two" spoiler system, this keeps spoiler-generated turbulence from interfering with the tail

*  Assembly "jigs" included to insure accuracy of wing assembly

*  2 screw wing mounting system (less screws to lose!)

Equipment recommendations:

Fuselage

2, 4 to 7 gram servos (The D47's we sell work well)

1 or 2 cell LiPo receiver battery (dimensions of compartment are 1/2"H x 1"W x approx. 3"L)  (We recommend "Venom Fly" 30C 800mah)

Full range mini receiver

Wing

2 servos (8mm thick) (The D47 we sell works well)

2 Servo extensions, approx. 12" each

Specifications

Wing span: 78" (2 meters)

Weight (ready to fly): 11.8oz-13.8oz (334 grams - 391 grams)

Wing area: 507.5 sq. in. (32.47 sq dm)

Wing loading: 11.8oz (334 grams) is 3.348oz/sq ft (10.2gr/sq dm)

                     13.8oz (391 grams) is 3.916oz/sq ft (11.9gr/sq dm)

 

Product Videos

2M Monarch Ascension (04:21)
Our newest kit is inspired by our original "Monarch Series" which began production way back in 1993. The original series were 1.5M kits, with the Ascension we decided to increase the wingspan to not only improve performance but also to introduce a new plane into the F3 RES contest category if you so desire. The Ascension is primarily a wood construction kit whereas the original was a blend of composite and wood, with later models being completely composite. The Ascension kit is optimized using today's technology to bring this special butterfly back to life. We believe you will truly enjoy the build and especially enjoy the stick time on this graceful butterfly of a sailplane whether you are the sport or contest RC Pilot! Visit our website at: www.djaerotech.com or our Facebook page at: https://www.facebook.com/djaerotech/
  • 2M Monarch Ascension
    Our newest kit is inspired by our original "Monarch Series" w...

Find Similar Products by Tag

2M  Sailplane  

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review